Udvidet returret til d. 31. januar 2025

Different Nature of copper composites fabricated by powder metallurgy

Different Nature of copper composites fabricated by powder metallurgyaf Mohit Raj
Bag om Different Nature of copper composites fabricated by powder metallurgy

This research fabricates three different type of composite material with the methodology of powder metallurgy. In which base material is copper electrolyte powder and reinforcement materials are tungsten carbide, silicon carbide, and graphite. A copper matrix containing graphite, tungsten carbide, silicon carbide are widely used as brushes, and bearing materials in many applications due to the excellent thermal and electrical conductivities, and the favorable self-lubricating performance. This book performs the hardness test for enhancing the mechanical properties, machining operation is also conducted for the output parameter like MRR (material removal rate). In EDM machine electrode is taken in use for Die sinking purpose, for making of the electrode, machining should be done on the composites material according to design parameter; MRR rate should be good for experimental work. This book proves the copper-silicon carbide is best among all of them.

Vis mere
  • Sprog:
  • Engelsk
  • ISBN:
  • 9786139817528
  • Indbinding:
  • Paperback
  • Sideantal:
  • 80
  • Udgivet:
  • 17. april 2018
  • Størrelse:
  • 150x5x220 mm.
  • Vægt:
  • 137 g.
  • BLACK NOVEMBER
Leveringstid: 2-3 uger
Forventet levering: 23. november 2024

Beskrivelse af Different Nature of copper composites fabricated by powder metallurgy

This research fabricates three different type of composite material with the methodology of powder metallurgy. In which base material is copper electrolyte powder and reinforcement materials are tungsten carbide, silicon carbide, and graphite. A copper matrix containing graphite, tungsten carbide, silicon carbide are widely used as brushes, and bearing materials in many applications due to the excellent thermal and electrical conductivities, and the favorable self-lubricating performance. This book performs the hardness test for enhancing the mechanical properties, machining operation is also conducted for the output parameter like MRR (material removal rate). In EDM machine electrode is taken in use for Die sinking purpose, for making of the electrode, machining should be done on the composites material according to design parameter; MRR rate should be good for experimental work. This book proves the copper-silicon carbide is best among all of them.

Brugerbedømmelser af Different Nature of copper composites fabricated by powder metallurgy



Gør som tusindvis af andre bogelskere

Tilmeld dig nyhedsbrevet og få gode tilbud og inspiration til din næste læsning.